Category: bridging

When I first met Cumulus Networks engineers (during NFD9) their focus on simplifying switch configurations totally delighted me (video).

After solving the BGP configuration challenge (could you imagine configuring BGP in a leaf-and-spine fabric with just a few commands in 2015), they did the same thing with EVPN configuration, where they decided to implement the simplest possible design (EBGP-only fabric running EBGP EVPN sessions on leaf-to-spine links), resulting in another round of configuration simplicity.

The March 2019 Packet Pushers Virtual Design Clinic had to deal with an interesting question:

Our server team is nervous about full-scale DR testing. So they have asked us to stretch L2 between sites. Is this a good idea?

The design clinic participants were a bit more diplomatic (watch the video) than my TL&DR answer which would be: **** NO!

Let’s step back and try to understand what’s really going on:

A good friend of mine who prefers to stay A. Nonymous for obvious reasons sent me his “how I lost my data center to a broadcast storm” story. Enjoy!

Small-ish data center with several hundred racks. Row of racks supported by an end-of-row stack. Each stack with 2 x L2 EtherChannels, one EC to each of 2 core switches. The inter-switch link details don’t matter other than to highlight “sprawling L2 domains."

VLAN pruning was used to limit L2 scope, but a few VLANs went everywhere, including the management VLAN.

Topology changes are a bane of large STP-based networks, and when they become a serious challenge you could probably use a tool that could track down what’s causing them.

I’m sure there’s a network management tool out there that can do just that (please write a comment if you know one); Eder Gernot decided to write his own while working on a hands-on assignment in the Building Network Automation Solutions online course. Like most course attendees he published the code on GitHub and might appreciate pull requests ;)

Wonder what else course attendees created in the past? Here’s a small sample.

One of my readers sent me this email after reading my Loop Avoidance in VXLAN Networks blog post:

Not much has changed really! It’s still a flood/learn bridged network, at least in parts. We count 2019 and talk a lot about “fabrics” but have 1980’s networks still.

The networking fundamentals haven’t changed in the last 40 years. We still use IP (sometimes with larger addresses and augmentations that make it harder to use and more vulnerable), stream-based transport protocol on top of that, leak addresses up and down the protocol stack, and rely on technology that was designed to run on 500 meters of thick yellow cable.

We all know about catastrophic headline-generating failures like AWS East-1 region falling apart or a major provider being down for a day or two. Then there are failures known only to those who care, like losing a major exchange point. However, I’m becoming more and more certain that the known failures are not even the tip of the iceberg – they seem to be the climber at the iceberg summit.

Antonio Boj sent me this interesting challenge:

Is there any way to avoid, prevent or at least mitigate bridging loops when using VXLAN with EVPN? Spanning-tree is not supported when using VXLAN encapsulation so I was hoping to use EVPN duplicate MAC detection.

MAC move dampening (or anything similar) doesn’t help if you have a forwarding loop. You might be able to use it to identify there’s a loop, but that’s it… and while you’re doing that your network is melting down.

I started January 2018 blogging with a major service provider failure. Why should 2019 be any different? Here’s what Century Link claimed was causing two-day outage (more comments here).

Supposedly it was a problem with the management network used by their optical gear, but it looks a lot like a layer-2 network spanning 15 data centers and no control-plane policing on the managed devices… proving yet again that large-scale layer-2 networks are a really bad idea.

Evil CCIE concluded his long list of leaf-and-spine fabric myths (more in part 1 and part 2) with a layer-2 fabric myth:

Layer 2 Fabrics can't be extended beyond 2 Spine switches. I had a long argument with a $vendor guys on this. They don't even count SPB as Layer 2 fabric and so forth.

The root cause of this myth is the lack of understanding of what layer-2, layer-3, bridging and routing means. You might want to revisit a few of my very old blog posts before moving on: part 1, part 2, what is switching, layer-3 switches and routers.

Got this response to my Stretched Layer-2 Revisited blog post. It’s too good not to turn it into a blog post ;)

Recently I feel like it's really vendors pushing layer 2 solutions, rather than us (enterprise customer) demanding it.

I had that feeling for years. Yes, there are environment with legacy challenges (running COBOL applications on OS/370 with emulated TN3270 terminals comes to mind), but in most cases it’s the vendors trying to peddle unique high-priced non-interoperable warez.

One of my friends sent me this question:

Do you remember if VLANs came first or was it VRFs?

I remember VLANs using ISL (pre-802.1q encapsulation) on early Cisco Ethernet switches (mid 90s), the earliest reference I could track down on Wikipedia is from 1988.

One of my readers was wondering about the stability and scalability of large layer-2 domains implemented with VXLAN. He wrote:

If common BUM traffic (e.g. ARP) is being handled/localized by the network (e.g. NSX or ACI), and if we are managing what traffic hosts can send with micro-segmentation style filtering blocking broadcast/multicast, are large layer-2 domains still a recipe for disaster?

There are three major (fundamental) problems with large L2 domains:

There are two reasonable ways of building a layer-2 leaf-and-spine fabric: use VXLAN (the direction almost everyone in the industry is taking at the moment), or routing-on-layer-2 technology like TRILL or SPB.

Got this comment to one of my L2-over-VXLAN blog posts:

I found the Avaya SPBM solution "right on the money" to build that L2+ fabric. Would you deploy Avaya SPBM?

Interestingly, I got that same question during one of the ExpertExpress engagements and here’s what I told that customer:

One of my readers sent me a lengthy email asking my opinion about his ideas for new data center design (yep, I pointed out there’s a service for that while replying to his email ;). He started with:

I have to design a DR solution for a large enterprise. They have two data centers connected via Fabric Path.

There’s a red flag right there…