Specify MPLS TE bandwidth as percentage of interface bandwidth

When configuring MPLS Traffic Engineering in your network, you have to specify the amount of bandwidth that the MPLS TE tunnels can request on each MPLS TE-enabled interface with the ip rsvp bandwidth command.

Until recently, this command accepted only fixed bandwidth (in kilobits), which could be pretty inconvenient if you wanted to use common interface templates or deployed MPLS TE on links with varying bandwidth (for example, Multilink PPP bundles). IOS release 12.2SRC introduced a variant of the same command (ip rsvp bandwidth percentage) that allows you to specify reservable bandwidth as percentage of the current interface bandwidth. Unfortunately this feature didn’t make it into 12.4(20)T.

Posted by Ivan Pepelnjak on Wednesday, October 08, 2008

Labels: ,

0 comments:

Post a Comment

If you're using Internet Explorer, your first attempt to publish a comment will probably fail (a feature of Blogger). Don't worry, just press the Post Comment button again.

Subscribe to: Post Comments (Atom)
Ivan Pepelnjak, CCIE#1354, is the chief technology advisor for NIL Data Communications. He has been designing and implementing large-scale data communications networks as well as teaching and writing books about advanced technologies since 1990. See his full profile, contact him or visit his page on Facebook.