Every introductory Cisco course tells you that you can stop any IOS command (for example, ping or traceroute) with the Ctrl/^ (also written as ^^ or Ctrl-Shift-6) escape character. What they usually forget to tell you is how to do that on non-US-ASCII keyboards or with telnet programs that do not want to recognize weird control characters.
The trick is simple - if you cannot generate ^^ (ASCII code 30), change the escape character. You can change it for the current session with the terminal escape-character char exec-level command or permanently with the escape-character char line configuration command. For example, to set the escape character for the current session to ctrl-C, use terminal escape-character 3 command.
Note: this article is part of You've asked for it series.
Ivan Pepelnjak, CCIE#1354, is the chief technology advisor for NIL Data Communications. He has been designing and implementing large-scale data communications networks as well as teaching and writing books about advanced technologies since 1990. See his full profile, contact him or follow @ioshints on Twitter.
Posts
thanks
ReplyDeletespasibo, blagodarya washei statie teper ja super haker! 8-)
ReplyDeleteVery good your tip, you a man of value. I shal open to you, the path to the heaven
ReplyDeleteoh thanks :)
ReplyDeleteI can stop this waiting for finishing the command :) yahooo