In the article Perfect Load-Balancing: How Close Can You Get?, you'll find in-depth information on how you can use MPLS traffic engineering to load-balance traffic in highly redundant designs.
Ivan Pepelnjak, CCIE#1354, is the chief technology advisor for NIL Data Communications. He has been designing and implementing large-scale data communications networks as well as teaching and writing books about advanced technologies since 1990. See his full profile, contact him or follow @ioshints on Twitter.
Posts
hot to load balance an mpls enabled label packet
ReplyDeleteNo problem. Read the article; it describes an MPLS TE solution. Just make sure you configure "mpls ip" on the tunnel interfaces and the MPLS packets will also be load-balanced based on their IP content.
ReplyDelete